Paint & Supplies

Create crisp, clear, fade- and chalk-resistant marks with Industrial Choice® M1800 System Precision Line Marking Paint. This water-based spray paint renders accurate, easy-to-read lines in bright, durable colors. Compared to common alternatives, it also provides better overall coverage as it applies to linear feet per volume. Aerosol can's precision tip virtually eliminates the potential for overspray, and the paint can be applied in temperatures down to 25° Fahrenheit. Use it on grass, gravel, packed soil, concrete, asphalt and more. For best results, apply using marking pistols or marking wands to complete everything from construction-site to athletic-field marking tasks.

Extend the life of stained or dingy ceilings with low-odor Covers Up™ Ceiling Paint & Primer. In a single, smooth, even blast, this ultra-convenient, all-in-one product permanently covers over and seals water stains while it touches up ceiling paint. Vertical, aerosol-spray format makes overhead application a breeze. Extremely versatile, it can be used under or over latex- and oil-based paints as well as on cured plaster, drywall, wood, metal, glossy laminates and more. Combo primer/paint dries with a high-hide, non-yellowing, flat white finish that even perfectly matches most new acoustic ceiling tiles. Intended Application Environment: Interior; Color(s): White; Finish/Sheen: Flat.

Zinsser® Mold Killing Primer is a protective, water-based coating that can be applied directly over existing mold, mildew and odor-causing bacteria. Featuring a proven, registered and approved antimicrobial-fungicidal agent, it not only covers over associated stains but also kills all pre-existing fungal organisms. Use it directly on nearly any dry, debris-free, non-porous, interior or exterior surface with minimal pre-cleaning in just about any residential, commercial or industrial environment: homes, offices buildings, retail establishments, schools, hospitals, factories and more. And though this primer is compatible with any topcoat product, it pairs perfectly with Zinsser® PERMA-WHITE® Mold & Mildew-Proof™ paints. To fully cover over and obscure heavy stains, a second primer coat with a tailored, stain-blocking product may be required. In such scenarios, BIN® and Cover Stain® primers are highly recommended. Zinsser® Mold Killing Primer is a protective, water-based coating that can be applied directly over existing mold, mildew and odor-causing bacteria. Featuring a proven, registered and approved antimicrobial-fungicidal agent, it not only covers over associ

Create crisp, easy-to-read marks in bright, ultra-durable colors with Industrial Choice® M1600 System Precision Line Marking Paint. Compared to common alternatives, this solvent-based spray paint not only allows you to cover more linear feet per can, but it also provides the best possible resistance against premature chalking and fading to ensure that marks remain vivid for much longer periods of time. Aerosol can's precision tip virtually eliminates the potential for overspray, and the paint can be applied in temperatures down to 25° F. Use it on grass, gravel, packed soil, concrete, asphalt and more. For best results, apply using marking pistols or marking wands to complete everything from construction-site to athletic-field marking tasks.

Cover over problematic areas while preventing the growth of mold and mildew. As it fully blocks stains and odors while preventing future growth and spreading, the intended surface doesn't even require extensive prep or pre-cleaning before application. Use Zinsser® Mold Blocking Primer Spray to cover and block nearly all forms of pre-existing mold, mildew, moss and fungi as well as most forms of odor-causing bacteria. Since this primer is also compatible with all topcoat products except solvent-based lacquers, it might very well be the perfect solution for non-porous interior or exterior surfaces in residential basements, attics and bathrooms as well as commercial factories, warehouses, storage facilities—nearly anywhere it might be needed. Convenient aerosol spray format is ideal for small projects, spot priming and touch-up work. Paint Sub-Category: Oil-Based; Primer; Spray Paint; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): White.

Looking for a “silver bullet” primer that covers everything? Choose the primer that contractors have kept in their vans for decades: Zinsser® BIN® Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN® Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though it's designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details). Paint Sub-Category: Primer; Shellac-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): White.

Create crisp, sharp lines with the Rust-Oleum® Professional Striping Machine. It’s designed specifically to simplify marking tasks on parking lots, athletic fields, bike paths, factory floors and just about any other area where ground- or floor-striping may be required. This handy machine’s adjustable line-width control allows you to render between two- and four-inch-wide stripes. For extensive jobs, its convenient storage compartment accommodates up to 12 additional cans of marking paint. No matter where you choose to use it, its heavy-duty wheels roll freely over a wide variety of terrain types to ensure quick and easy, straight-line application. Collapsible, fold-down handle enables compact storage. Paint-Supply Type: Ground Marking Machine; Handle Type: Collapsible with Paint-Trigger Control; Material(s): Rubber; Steel; Color(s): Yellow.

The MULE is an easy to use, abrasion-resistant commercial coating designed specifically for high traffic areas that are subject to routine cleaning and disinfection: schools, healthcare facilities, offices, hospitality environments and more. Verstile Modified Urethane Latex Epoxy (MULE) features excellent adhesion qualities, allowing it to be applied on a wide range of both primed and previously painted materials, indoor and out. Use it on walls, doors, moldings, railings and even floors. Low-odor, water-based formula.

Get fast dry times and high-quality color with Industrial Choice® 1600 System Multi-Purpose Enamel Spray Paint. Since it provides up to twice the coverage area, as compared to other options, this oil-based enamel is an ideal choice for industrial applications, especially when wishing to protect against everyday wear and tear while providing a finish that looks great. Multi-purpose paint features excellent chip, crack and peel resistance, making it perfect for a variety of industrial/maintenance projects: tools, motors, furniture, equipment, lockers, ladders, color-coding and more. Extra-wide comfort nozzle reduces finger fatigue and enables spraying from any angle, even from upside down. Once dry, the enamel also withstands temperatures of up to 200° Fahrenheit.

Get the speed and quality of professional spray systems without the hassle. BIN® Aerosol Primer with Turbo Spray System® combines the power of BIN® primers with the speed and convenience of the Turbo Spray System®. Always great for blocking stains and odors associated with water-, smoke- and fire-damage, BIN® professional primers are uniquely suited for disaster restoration jobs. As they block odors from pets, mildew and cigarettes, they're perfect for a wider variety of specialty painting projects, too. For added versatility, they also employ shellac and rosin binders, which easily sand to a powder when dry, allowing BIN® primers to double as excellent wood sealers. The proprietary Turbo Spray System® delivers a wide, 10" spray pattern and four-times the output of traditional primer sprays, ensuring fast and easy full coverage. For best results, hold can upright 18 to 24 inches from the intended surface, and spray in a steady back-and-forth motion, slightly overlapping on each stroke. Paint Sub-Category: Primer; Spray Paint; Solvent-Based; Intended Application Environment: Interior; Finish/Sheen: Flat; Color(s): White.

Features a fast-drying formula that creates bold, well-defined and durable lines on various surfaces including concrete, pavement, dirt, gravel and grass. Paint Sub-Category: Spray Paint; Water-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): Athletic Inverted White.